> Sliding Gate Hardware > CMO Fixed Safety Edge

CMO Fixed Safety Edge

This item is discontinued, stock limited please call for availability or alternatives.

Gate Safety Edges. Rubber and CE marked and Certified. Sold in lengths from 1.2 to 6 metres. 

  • The CMO was certified on 31/12/2009 Part 2 Validation as a Category 3 Safety Edge, in accordance to the standard and / or technical specifications of EN ISO 13849-2.  Please refer to DFM Automazioni or the PDF attached for further details.
  • This gate safety edge provides a very effective means of cut out in case of emergency, and does not fail in operation if a single micro-switch fails.  Also it will stop the gate if the wire breaks or becomes out of calibration.
  • The CMO edge was developed specifically to meet the latest standards, and offers many advantages.  It is simple to cut down and does not rely on the use of glue for it to be waterproof.  The CMO activates right to the bottom of the edge.

Please note - These edges can simply be cut down if too large. Instructions included in shipment

Important - As with all types of safety edges the category classification does depend on the system as a whole.  The other electronics e.g/ control board / self test and wireless transmittor receiver can alter the category classification. Use of the IRFC4 Monitor with end of line resistor 8K2 can help with maintaining the CAT2/3 status on older systems. Later type gate control panels may have a dedicated 8K2 edge input point that may support edges directly. We have the 8K2 resistor available as a separate item.



Safety
The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice. 
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Photocell Beams'.
Please call us with any questions.

All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to view here.
 
Item Code & description
Price
QTY
Order
1261
1.7m-Safety-Edge
£55.00 Ex VAT: £45.83
1264
2.5m-Safety-Edge
£67.00 Ex VAT: £55.83
1281
Safety-Edge-Monitor---PCB-8.2Kohm
£37.95 Ex VAT: £31.63
8K2 resistor
8K2-End-Of-Line-Resistor-Harness
£3.00 Ex VAT: £2.50
Instruction Manual for the DFM CMO Safety Edge
DFM CMO Safety Edge – NC Manual
People Also Bought