DESCRIPTION:
Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978. Has continuous self-test ability through the Scheda control board.
APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.
LENGTHS STOCKED:
1200, 1600, 2000, 2500, 4000 and 6000mm.
All sizes have infinite adjustment. Adjusta-Length.
TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.
MECHANICAL CHARACTERISTICS:
- Internal resistive tape.
- Soft rubber endcaps for total protection.
- Battery operated transmittor can be integrated inside the edge.
- Operating temperatures: -10° +55° C.
ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).
IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality. The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.
If the control board has one 8k2 input you can connect one edge, for two edges you can use the
CCE Scheda safety card, and for four edges the
SA04 safety card.
There is also a wireless version -
Compact Adjusta Wireless Resistive Safety Edge
DESCRIPTION:
Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978. Has continuous self-test ability through the Scheda control board.
APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.
LENGTHS STOCKED:
1200, 1600, 2000, 2500, 4000 and 6000mm.
All sizes have infinite adjustment. Adjusta-Length.
TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.
MECHANICAL CHARACTERISTICS:
- Internal resistive tape.
- Soft rubber endcaps for total protection.
- Battery operated transmittor can be integrated inside the edge.
- Operating temperatures: -10° +55° C.
ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).
IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality. The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.
If the control board has one 8k2 input you can connect one edge, for two edges you can use the
CCE Scheda safety card, and for four edges the
SA04 safety card.
There is also a wireless version -
Compact Adjusta Wireless Resistive Safety Edge