
Double Electric Gate Automation Kit
Electro-mechanical gear for swing electric gates for residential use up to 3.6 metres in width; ideal for gates with large posts, it comes complete with release handle and key. The main structure is in die-cast aluminium and the steel gears ensure a long lasting and silent operation.
Electric Gate Kit Contents:
[1] E80/TX52R/R Remote Control (x2)
[2] H93 Receiver Card
[3] Aerial / Beacon (Design may vary)
[4] 180° Roger Technology M90 Photocells
[5] R23/372 230v Articulated Motors (x2)
[6] H70/200AC Control Board
Optional Extras:
Double Gate Magnetic Lock Kit [A]
- Interlocking floor device (left or right)
- Adjustable pin and bracket kit (8mm Bracket)
- Door Loop
- 250kg Maglock
- Z & L Bracket
- VHLR - Relay
- 2.5amp Lock Power Supply
.jpg)
Important - Please use the LT303 extension arms if your gate pillars measure greater than 250mm in depth on the side that the hinges are mounted on (As illustrated in the image below by point B).
.jpg)
Should your pillars or the (B) measurement be larger than 250mm please add the LT303 extension arms to your basket (See figure 1 on the right for details).
If you need any assistance please don't hesitate to speak to a member of staff who will be happy to help.
Click here to download a FREE Roger Mains brochure (R23/372 Page 34):

Technical Specifications:
Power supply |
230V |
Rating |
200W |
Thrust |
400N |
Duty cycle |
IP 43 |
Jogging |
50% |
Motor Overload Cutout |
140 C |
Working temperature |
-20°C to 70°C |
Actuator weight |
15.5 kg |
Time for opening 90° |
14s |
This is a default content, you can edit here.
This is a default content, you can edit here.
Important

A
mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.

If you have wooden gates then we strongly recommend the use of our
adjustable bracket set as these commercial grade motors come with standard weld-on brackets.
Safety
The Electric Gate Shop is committed to providing safe electric gate solutions. The Gate Safety Guide runs through the hazards and outlines a code of practice.

Click the button for the free GUIDE TO GATE SAFETY.
Click to buy '
Certified Gate Safety Edges' and '
Photocell Beams'.
Please call us with any questions.
All automated/electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits and is available to
view here.