> Accessories > Rising Wheel Stop

Rising Wheel Stop

The rising wheel stop is designed for gates on a driveway with a gradient, it allows a stop at the bottom of the gate when there is a gap between the bottom of the gate and the floor to allow the gates to swing over a sloped driveway.
  • The back section is 40cm tall with three holes to secure the device to the gate with a fixing at the top so the rising wheel section doesn't rise out of the holder.
  • The sliding wheel unit has two guide wheels built into the body of the stop that are 17cm apart to hold the unit straight. This meaning the device can extend up to 17cm (7inch).
  • The bottom of the sliding wheel unit is 3cm off the ground.
  • The wheel is 8cm in diameter.
  • The ground bump stop rises 2cm off of the ground.




 
 
 
Item Code & description
Price
QTY
Order
1534
Rising-Wheel-Stop-Single
£45.00 Ex VAT: £37.50
1534
Rising-Wheel-Stop-Twin
£90.00 Ex VAT: £75.00
2292
Floor-Bump-for-Rising-Wheel-Stop
£8.00 Ex VAT: £6.67
This is a default content, you can edit here.
This is a default content, you can edit here.
This is a default content, you can edit here.