Electric Gate Accessory Cable
6 Core 0.5mm Electric Gate Accessory Cable
Perfect for low voltage electric gate accessories such as photocells, keypads & push buttons etc. For use in automotive & marine applications.
- Manufactured in the UK
- Manufactured to the correct colours to match the Roger Technology electric gate automation control panels
Cable Technical Info
Conductor Specification (mm)* 6 x 16/0.20
Conductor Cross Section (mm²) 6 x 0.5
Maximum Overall Diameter (mm) 6
Nominal Current Rating (Amps)** 11.0
Sheath Colour Black
Core Colours Black, Red, Green, Yellow, Brown & Blue
Reel Size (30 Metres)
Cable Specifications
- Cores manufactured to ISO 6722-1:2011 (Class B) 105ºC
- Plain copper conductors to BS EN 60228:2005, PVC insulated
- Single core suitable for use at temperatures from -40ºC to 105ºC with excursions up to 120ºC
- Twins and multicores PVC sheathed at 70ºC
- Suitable for 12v or 24v systems (Maximum voltage 60v)
- Reduced insulation gives considerable savings in weight and volume especially when used in large wiring harnesses
- Good resistance to petrol, diesel, lubricating oils and diluted acids
- PVC insulation offers good resistance to abrasion and cut through
*The conductor specifications shown are representative configurations; actual cable strand may differ slightly, but will meet resistance values shown.
**Nominal current amperage ratings are provided as a guide only, and can vary depending on application, conditions and environmental factors. If in doubt, please consult a qualified electrician.