CCE Mini (37mm) Compact Adjusta Wireless Resistive CND Safety Edge with Wireless Band IP67 Transmitter & Receiver

PRICE RANGE: £82.29 - £217.21
CCE Mini 37mm Compact Adjusta Wirelessband Resistive CND Safety Edge with Wireless Band IP67 Transmitter & Receiver Kit.
VIEW OPTIONS & Full Description
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday
Enquire about this product
Item Code & Description
price
qty
order
MINICND1600 + 3303 CCE Mini 37mm Safety Edge (1.6m) & Wirelessband IP67 TX (Requires Receiver Below)
£186.34 Ex VAT: £155.28
-
+
MINICND2000 + 3303 CCE Mini 37mm Safety Edge (2.0m) & Wirelessband IP67 TX (Requires Receiver Below)
£200.07 Ex VAT: £166.73
-
+
MINICND2500 + 3303 CCE Mini 37mm Safety Edge (2.5m) & Wirelessband IP67 TX (Requires Receiver Below)
£217.21 Ex VAT: £181.01
-
+
004469 Wirelessband-IP67-Receiver-(FOR-ABOVE)
£82.29 Ex VAT: £68.58
-
+

DESCRIPTION:
Mini Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978.  Has continuous self-test ability through the Scheda control board.

APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.

LENGTHS STOCKED:
Just 37mm thick.
1600mm, 2000mm and 2500mm.
All sizes have infinite adjustment. Adjusta-Length.

TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.

MECHANICAL CHARACTERISTICS:
  • Internal resistive tape.
  • Soft rubber endcaps for total protection.
  • Battery operated transmittor can be integrated inside the edge.
  • Operating temperatures: -10° +55° C.

ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).

IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality.  The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.

If the control board has one 8k2 input you can connect one edge, for two edges you can use the CCE Scheda safety card, and for four edges the DFM IRFC4D safety card.

IP67 Pro Wireless Transmitter & Receiver Kit

Wireless system for resistive, mechanical and low power optical safety edges. The system consists of one 2 channel transmitter and one receiver.                                       

- 1 Output channel
- 14 transmitters per receiver
- Up to 5 years battery life | Tested up to 8 years in factory / ideal coniditions
- IP67
- 100m Range

Technical specification:

Receiver supply voltage: 12/24 AC/DC
Transmitter supply voltage: 2x AA lithium battery 3V DC type
Receiver memory: 14 transmitters
Receiver output: 2 Relay, micro disconnection 1B or power free contact
Receiver power consumption: 0.5 W-12V / 1.2 w 2 - 24v
Protection class (IEC 60529): IP55
Frequency channels: 868.95 Mhz & 869.85Mhz
Range:  100m
Transmitter power consumption:  Transmitting 17mA / Stand by 16uA
 
DESCRIPTION:
Mini Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978.  Has continuous self-test ability through the Scheda control board.

APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.

LENGTHS STOCKED:
Just 37mm thick.
1600mm, 2000mm and 2500mm.
All sizes have infinite adjustment. Adjusta-Length.

TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.

MECHANICAL CHARACTERISTICS:
  • Internal resistive tape.
  • Soft rubber endcaps for total protection.
  • Battery operated transmittor can be integrated inside the edge.
  • Operating temperatures: -10° +55° C.

ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).

IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality.  The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.

If the control board has one 8k2 input you can connect one edge, for two edges you can use the CCE Scheda safety card, and for four edges the DFM IRFC4D safety card.

IP67 Pro Wireless Transmitter & Receiver Kit

Wireless system for resistive, mechanical and low power optical safety edges. The system consists of one 2 channel transmitter and one receiver.                                       

- 1 Output channel
- 14 transmitters per receiver
- Up to 5 years battery life | Tested up to 8 years in factory / ideal coniditions
- IP67
- 100m Range

Technical specification:

Receiver supply voltage: 12/24 AC/DC
Transmitter supply voltage: 2x AA lithium battery 3V DC type
Receiver memory: 14 transmitters
Receiver output: 2 Relay, micro disconnection 1B or power free contact
Receiver power consumption: 0.5 W-12V / 1.2 w 2 - 24v
Protection class (IEC 60529): IP55
Frequency channels: 868.95 Mhz & 869.85Mhz
Range:  100m
Transmitter power consumption:  Transmitting 17mA / Stand by 16uA

DESCRIPTION:
Mini Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978.  Has continuous self-test ability through the Scheda control board.

APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.

LENGTHS STOCKED:
Just 37mm thick.
1600mm, 2000mm and 2500mm.
All sizes have infinite adjustment. Adjusta-Length.

TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.

MECHANICAL CHARACTERISTICS:
  • Internal resistive tape.
  • Soft rubber endcaps for total protection.
  • Battery operated transmittor can be integrated inside the edge.
  • Operating temperatures: -10° +55° C.

ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).

IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality.  The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.

If the control board has one 8k2 input you can connect one edge, for two edges you can use the CCE Scheda safety card, and for four edges the DFM IRFC4D safety card.

IP67 Pro Wireless Transmitter & Receiver Kit

Wireless system for resistive, mechanical and low power optical safety edges. The system consists of one 2 channel transmitter and one receiver.                                       

- 1 Output channel
- 14 transmitters per receiver
- Up to 5 years battery life | Tested up to 8 years in factory / ideal coniditions
- IP67
- 100m Range

Technical specification:

Receiver supply voltage: 12/24 AC/DC
Transmitter supply voltage: 2x AA lithium battery 3V DC type
Receiver memory: 14 transmitters
Receiver output: 2 Relay, micro disconnection 1B or power free contact
Receiver power consumption: 0.5 W-12V / 1.2 w 2 - 24v
Protection class (IEC 60529): IP55
Frequency channels: 868.95 Mhz & 869.85Mhz
Range:  100m
Transmitter power consumption:  Transmitting 17mA / Stand by 16uA
 
DESCRIPTION:
Mini Compact Adjusta-Length Resistive safety edge (8,2 K Ω) with small profile and compliant with the standard EN12978.  Has continuous self-test ability through the Scheda control board.

APPLICATIONS:
Sliding gates, swing gates, sectional doors, rolling shutters.

LENGTHS STOCKED:
Just 37mm thick.
1600mm, 2000mm and 2500mm.
All sizes have infinite adjustment. Adjusta-Length.

TRIMMING LENGTHS:
Once the special resistive tape is removed, the Compact Adjusta can be cut down to any length. The tape length can then be adjusted without the need for gluing or re- sealing and reassembled.

MECHANICAL CHARACTERISTICS:
  • Internal resistive tape.
  • Soft rubber endcaps for total protection.
  • Battery operated transmittor can be integrated inside the edge.
  • Operating temperatures: -10° +55° C.

ELECTRICAL CHARACTERISTICS:.
Resistive system with continuous self-diagnosis (8.2 K Ω).

IMPORTANT:
All the Compact Adjusta safety edges are 8k2 (8.2k ohm), so need to be connected to a control board with 8k2 functionality.  The 8k2 resistors allow monitoring of the safety edge or edges so that they comply with the latest safety standards.

If the control board has one 8k2 input you can connect one edge, for two edges you can use the CCE Scheda safety card, and for four edges the DFM IRFC4D safety card.

IP67 Pro Wireless Transmitter & Receiver Kit

Wireless system for resistive, mechanical and low power optical safety edges. The system consists of one 2 channel transmitter and one receiver.                                       

- 1 Output channel
- 14 transmitters per receiver
- Up to 5 years battery life | Tested up to 8 years in factory / ideal coniditions
- IP67
- 100m Range

Technical specification:

Receiver supply voltage: 12/24 AC/DC
Transmitter supply voltage: 2x AA lithium battery 3V DC type
Receiver memory: 14 transmitters
Receiver output: 2 Relay, micro disconnection 1B or power free contact
Receiver power consumption: 0.5 W-12V / 1.2 w 2 - 24v
Protection class (IEC 60529): IP55
Frequency channels: 868.95 Mhz & 869.85Mhz
Range:  100m
Transmitter power consumption:  Transmitting 17mA / Stand by 16uA
Customer Reviews (0)