Ideal for gates that will have underground automation. As this allows you to achieve the required 67mm from the centre point of the gate hinge pin to the surface of the post whilst also reducing the distance between the gate and the pillar making for more of an efficient & secure swing.
The Combi Arialdo top hinge is to be used in-line with the Combi Arialdo 861G.40/35 Square Joint
Ideal for gates that will have underground automation. As this allows you to achieve the required 67mm from the centre point of the gate hinge pin to the surface of the post whilst also reducing the distance between the gate and the pillar making for more of an efficient & secure swing.
The bracket to be used with a peice of welded tube or with the pin inserts below:
The 861G.40/35 40x40 Square Joint welds to the pivot point of the gate whilst the top hinge replaces the highest hinge. Suits 40x40mm Box Section Gates
Hinge & Backplate Dimension:
A: 47mm
B: 35mm
C: 42.5mm
D: 35mm
G:72mm
Backplate: 100mm x 100mm
Box Section Pin Dimensions:
A: 35mm
B: 35mm
C: 9mm
ØD: 35mm