Home > Underground Electric Gate kits > Single Underground Automation > (1m - 2.2m) Gate > SUB 180 230V or 12VDC Single Underground Gate Kit OIL COOLED
SUB 180 230V or 12VDC Single Underground Gate Kit OIL COOLED

Extremely reliable Sub 180 E1 FGS 230V Underground gate system, perfect for farm gates whilst underground out of sight.  This kit does not need the usual 65mm hinge centre as required on conventional underground motors. Also the only underground on the market that caters for timber gates.
Electric Gate Kit - Parts
[1] (Oil Filled) -  Gate Motor (BA502)
[2] Zinc Plated Foundation Box
[3] Advanced Control Panel
[4] 2 x 2 Button Cloning Remote Keyfob (Chrome)
[5] Wireless - Coded Entry
[6] Pair Of Safety Photocells
[7] Viro - Electric Lock
[8] Keyswitch
[9] 433Mhz Coded Aerial

* The 12V version also has a Battery Backup Kit available to keep your gate running in a power outage.

  • Solid Reducer box is totally made of die-cast aluminium making it corrosion free. Drag arm is made of galvanised steel and gears are made of high steel and aluminium bronze. Lubrication in oil-bath, cableguide is made of nickel-plated brass IP68 and is also water resistant.
  • Convenient Fully bearing supported reducer, control panel includes slowdown to avoid crashes. Very little reducer maintenance and the electrics can be checked without removing the shutter.
  • Invisible The BA502 automation does not alter the look of the gates unlike the arm systems. The BA502 are installed underground without any modifications to the gates.
  • Easy The reduced encumbrance of the BA502 actuator simplifies the installation. 360° rotation of the motor allows totally opening of the shutter. The possibility to install the motor away from the pivot plank allows using the BA502 on every type of gate. The foundation box can be self-supporting and this makes installation easy and fast at a very reduced price.


Max width of the shutter 2.5 m (with standard foundation box)
3.6 m (with heavy duty foundation box)
Max weight of the shutter 300kg
Max frequency of use 20 cycles/hour
Max opening angle 180°
Max torque 400 Nm
Opening speed 90° in 13 seconds
Motor Box Dimensions (Seen) WxLxH: 157mm / 419mm  / 128mm
Foundation Box Dimensions (below ground level) 215mm /439mm /136mm
+ Cast aluminium box  

The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice. 
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.

All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to view here.

A mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
£ 546.77(Ex VAT £455.64)
Item Code & Description
Ex VAT: £455.64
Ex VAT: £486.04
Ex VAT: £48.26
Ex VAT: £42.47
Ex VAT: £38.61
Instruction Manual for the BA502 Swing Gate Motor

Installation Manual for the BA502 Swing Gate Motor
From Automazioni BA502 Installation Manual

Instruction Manual for the 909/B Control Panel
ELBE 909A / 909B Control Panel Manual

Instruction Manual for the 207/C Control Panel
ELBE 207C 12 / 24V Control Board Manual
Related Products
ready to use stop kit surface mounted
Ready to use stop kit surface mounted. Also includes 2 rubber bump stops for the gate wings to open against.
(Ex VAT £12.05)
Customer Reviews (0)