Features Stainless steel shaft and steel cut gears for long life, maintenance free motors.
Electro-mechanical reduction gear for swing gates up to 3.5m in width. The sturdy die-cast aluminium housing has been structurally designed to withstand the high forces involved. When installed it is totally concealed inside the foundation box.
The kit uses a hot dipped, galvanised foundation box.
Control box has all standard features + many extra including a hold open via remote control, pedestrian entry via remote. Two courtesy light outputs, auto-programming, obstacle detection, automatic closing and electric lock output circuits standard.
Dimensions 380mm x 320mm x 160mm
From top of lid to gate position minimum 60mm.
Kit Contains:
[1] 2 x 230v 350w Motors
[2] 2 x Heavy Duty Foundation Boxes
[3] 1 x Advanced Control panel with slowdown
[4] 1 x Aerial
[5] 1 x Working Light
[6] 1 x Pair of Safety Photocells
[7] 1 x Keyswitch
[8] 2 x Remote Controls
NOTE - Internal stops are an extra on this kit. We would always recommend external physical stops to be used with this this kit.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions. The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy '
Certified Gate Safety Edges' and '
Photocell Beams'.
Please call us with any questions.
All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to
view here.
Important
A
mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
Features Stainless steel shaft and steel cut gears for long life, maintenance free motors.
Electro-mechanical reduction gear for swing gates up to 3.5m in width. The sturdy die-cast aluminium housing has been structurally designed to withstand the high forces involved. When installed it is totally concealed inside the foundation box.
The kit uses a hot dipped, galvanised foundation box.
Control box has all standard features + many extra including a hold open via remote control, pedestrian entry via remote. Two courtesy light outputs, auto-programming, obstacle detection, automatic closing and electric lock output circuits standard.
Dimensions 380mm x 320mm x 160mm
From top of lid to gate position minimum 60mm.
Kit Contains:
[1] 2 x 230v 350w Motors
[2] 2 x Heavy Duty Foundation Boxes
[3] 1 x Advanced Control panel with slowdown
[4] 1 x Aerial
[5] 1 x Working Light
[6] 1 x Pair of Safety Photocells
[7] 1 x Keyswitch
[8] 2 x Remote Controls
