Wireless Push Button
- Where gate operation needs to be by a substantial IP exterior push button, maybe from a vehicle or horseback. This push button is ideal where electric automatic gates need to be controlled by wireless push button. Also a solution for solar powered electric gates where power may be scarce.
- The wireless version sends a 433 mhz signal back to the radio receiver. Any Elbe 909 or 207 gate control panel will already have this built in. Also compatible with ROGER Technology Remotes. In other situations a separate radio receiver may be required. See below.
- The wired version can be used in conjunction with timers etc.
Outdoor Bell Push Switch, Narrow Gang, 2 Ways, 1 Pole, 10A Current Rating, 230Vac Voltage Rating, Grey Colour, Push to Make / Push to Break, 55mm Depth, 5×20mm Cable Entries, 2 x Earth Terminals in Back Box, IP66 Weatherproof Rating, Complies with EN60669, Conforms to BS60669
- 230V AC 10A (fluorescent rated) single gang SP 2-way
- Push to make bell push
- 5x 20mm cable entries (bottom entry supplied with cut to size grommet)
- 2x earth terminals in back box
- Impact resistant housing
- IP66 weatherproof rating
- Complies with EN60669
- BSI and CE approved
| Description |
Single gang push bell |
| Waterproof rating |
IP66 |
| Operating voltage |
230V AC 50Hz 10A |
| Operating temperature |
0°C to -40°C |
| DS standards |
EN60669 |
| Cable capacity |
3 x 2.5mm² |
| Dimensions |
Single gang 70(L) x 70(H) x 55(D)mm |
Wireless Push Button
- Where gate operation needs to be by a substantial IP exterior push button, maybe from a vehicle or horseback. This push button is ideal where electric automatic gates need to be controlled by wireless push button. Also a solution for solar powered electric gates where power may be scarce.
- The wireless version sends a 433 mhz signal back to the radio receiver. Any Elbe 909 or 207 gate control panel will already have this built in. Also compatible with ROGER Technology Remotes. In other situations a separate radio receiver may be required. See below.
- The wired version can be used in conjunction with timers etc.
Outdoor Bell Push Switch, Narrow Gang, 2 Ways, 1 Pole, 10A Current Rating, 230Vac Voltage Rating, Grey Colour, Push to Make / Push to Break, 55mm Depth, 5×20mm Cable Entries, 2 x Earth Terminals in Back Box, IP66 Weatherproof Rating, Complies with EN60669, Conforms to BS60669
- 230V AC 10A (fluorescent rated) single gang SP 2-way
- Push to make bell push
- 5x 20mm cable entries (bottom entry supplied with cut to size grommet)
- 2x earth terminals in back box
- Impact resistant housing
- IP66 weatherproof rating
- Complies with EN60669
- BSI and CE approved
| Description |
Single gang push bell |
| Waterproof rating |
IP66 |
| Operating voltage |
230V AC 50Hz 10A |
| Operating temperature |
0°C to -40°C |
| DS standards |
EN60669 |
| Cable capacity |
3 x 2.5mm² |
| Dimensions |
Single gang 70(L) x 70(H) x 55(D)mm |
