Roger Technology H21/510S 230v Electric Gate Kit - Single

PRICE RANGE:
Roger Technology H21/510S 230v single underground kit for heavy gates up to 5m per wing. The unit features the positive drive system, that enables full control of the gate
VIEW OPTIONS & Full Description
Order in the next Hours Mins and Seconds,
To get your item delivered on Tuesday
Enquire about this product
Item Code & Description
price
qty
order
Roger Technology H21/510S 230v Electric Gate Kit - Single H21/510M90S
£1402.81 Ex VAT: £1169.01
-
+
 


 

Single Electric Gate Automation Kit

The Roger Technology H21 underground motor is the largest belowground electric gate motor in the Roger Technology fleet. The Heavy duty underground gate kit is capable of automating 5m per wing. Features steel cut gears for long life maintenance-free motors. The positive drive system enables full control of the gate throughout the opening and closing cycles.

Electric Gate Kit Contents:

[1] E80/TX52R/R Remote Control (x2)
[2] H93 Receiver Card
[3] RL750 Release Lever
[4] H21/500 Heavy Duty Motor
[5] FU500 Foundation Box
[6] H70/22 230v Control Panel
[7] 180° Roger Technology M90 Photocells
[8] Aerial / Beacon (Design may vary)
[9] Magnetic Lock Kit
[10] Single Electric Gate Lock

Electric Motor Features

  • Reliable and robust: The new gear motor completely made from aluminium die casting with IP67 protection, designed to meet very important installation requirements for swing gates with particular weights and dimensions.
  • Indestructible and almost invisible: Due to its robust foundation box and the development of the movement of the motor all based on a rack with an adjustable mechanical stop, allows completely linear movement of the suspended completion motor.
  • The kit uses a hot-dipped, galvanised foundation box with an internal opening and closing limit switches
  • Foundation box is compact and designed specifically to not intrude on the ground or the public area, available with a cover made from cold-dip galvanised steel and a cover made from AISI 304 stainless steel.

Click here to download the manual for the H21 kit.


Important
A mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.


If you have wooden gates then we strongly recommend the use of our adjustable bracket set as these commercial grade motors come with standard weld-on brackets.

Safety
The Electric Gate Shop is committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards and outlines a code of practice. 

Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.

All automated/electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits and is available to view here.




Single Electric Gate Automation Kit

The Roger Technology H21 underground motor is the largest belowground electric gate motor in the Roger Technology fleet. The Heavy duty underground gate kit is capable of automating 5m per wing. Features steel cut gears for long life maintenance-free motors. The positive drive system enables full control of the gate throughout the opening and closing cycles.

Electric Gate Kit Contents:

[1] E80/TX52R/R Remote Control (x2)
[2] H93 Receiver Card
[3] RL750 Release Lever
[4] H21/500 Heavy Duty Motor
[5] FU500 Foundation Box
[6] H70/22 230v Control Panel
[7] 180° Roger Technology M90 Photocells
[8] Aerial / Beacon (Design may vary)
[9] Magnetic Lock Kit
[10] Viro V06 Lock
 


 

Single Electric Gate Automation Kit

The Roger Technology H21 underground motor is the largest belowground electric gate motor in the Roger Technology fleet. The Heavy duty underground gate kit is capable of automating 5m per wing. Features steel cut gears for long life maintenance-free motors. The positive drive system enables full control of the gate throughout the opening and closing cycles.

Electric Gate Kit Contents:

[1] E80/TX52R/R Remote Control (x2)
[2] H93 Receiver Card
[3] RL750 Release Lever
[4] H21/500 Heavy Duty Motor
[5] FU500 Foundation Box
[6] H70/22 230v Control Panel
[7] 180° Roger Technology M90 Photocells
[8] Aerial / Beacon (Design may vary)
[9] Magnetic Lock Kit
[10] Single Electric Gate Lock

Electric Motor Features

  • Reliable and robust: The new gear motor completely made from aluminium die casting with IP67 protection, designed to meet very important installation requirements for swing gates with particular weights and dimensions.
  • Indestructible and almost invisible: Due to its robust foundation box and the development of the movement of the motor all based on a rack with an adjustable mechanical stop, allows completely linear movement of the suspended completion motor.
  • The kit uses a hot-dipped, galvanised foundation box with an internal opening and closing limit switches
  • Foundation box is compact and designed specifically to not intrude on the ground or the public area, available with a cover made from cold-dip galvanised steel and a cover made from AISI 304 stainless steel.

Click here to download the manual for the H21 kit.


Important
A mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.


If you have wooden gates then we strongly recommend the use of our adjustable bracket set as these commercial grade motors come with standard weld-on brackets.

Safety
The Electric Gate Shop is committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards and outlines a code of practice. 

Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.

All automated/electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits and is available to view here.




Single Electric Gate Automation Kit

The Roger Technology H21 underground motor is the largest belowground electric gate motor in the Roger Technology fleet. The Heavy duty underground gate kit is capable of automating 5m per wing. Features steel cut gears for long life maintenance-free motors. The positive drive system enables full control of the gate throughout the opening and closing cycles.

Electric Gate Kit Contents:

[1] E80/TX52R/R Remote Control (x2)
[2] H93 Receiver Card
[3] RL750 Release Lever
[4] H21/500 Heavy Duty Motor
[5] FU500 Foundation Box
[6] H70/22 230v Control Panel
[7] 180° Roger Technology M90 Photocells
[8] Aerial / Beacon (Design may vary)
[9] Magnetic Lock Kit
[10] Viro V06 Lock
Customer Reviews (0)