Automatic Gate Kits From The Online Specialist

Ask the experts - Call 01405 785656 / 01226 370549

Sliding Gate Hardware Kits

ProductImage

The sliding gate hardware kits listed below include everything you will need for a manual sliding gate.
Including (click on any item for detailed description):


Choosing the Correct Kit:
To find the correct kit there are two steps, firstly you must know the correct opening width.
The Electric Gate Shop has already accounted for overhang, so the only measurements you need is the opening between the posts.
Firstly, choose the size opening number from the list:
[1] 1200 - 1750mm Opening
[2] 1750 - 2600mm Opening
[3] 2600 - 3650mm Opening
[4] 3650 - 5500mm Opening
[5] 5500 - 7450mm Opening
[6] 7450 - 8600mm Opening
[7] 8600 - 9500mm Opening
Now, the requirements for your gate:
[A] Everything you will need for a sliding gate, using Concrete in floor track, C Channel and rollers to support the gate.
[B] As above but with Boltdown floor track replacing Concrete in floor track, C Channel and rollers to support the gate.
[C] As kit (A) but the C Channel & C Rollers are replaced with 2 of 40 x 45mm Nylon support rollers.
[D] As kit (B) but the C Channel & C Rollers are replaced with 2 of 40 x 45mm Nylon support rollers.Now combine both the number and letter to find your hardware kit.

e.g  A full Sliding Gate Hardware Kit (SGHK - 3A) using concrete in floor track for a gate opening of 2700mm between the posts would be kit (3A)