IRFC4/D Resistive Safety Edge Monitor Cat 3

PRICE RANGE:
IRFC4/D Resistive Safety Edge Monitor Cat 3
VIEW OPTIONS & Full Description
Order in the next Hours Mins and Seconds,
To get your item delivered on Monday
Enquire about this product
Item Code & Description
price
qty
order
IRFC4/D Resistive Safety Edge Monitor Cat 3 IRF C4/D
£0.00 Ex VAT: £0.00
-
+

IRFC4/D Resistive Safety Edge Monitor Cat 3
  • Electronic control card for closing and opening systems equipped with electromechanical or resistive safety edges. The device is installed between the sensor of the safety edge and the control unit and it keeps on controlling the state of circuitry causing the gate motion to stop in case of anomaly.
  • It detects the short circuit condition, the cut of the electric wires as well as the normal functioning of the electromechanical micro switch or of the resistive safety edge.
  • A maximum 4 devices can be connected with values from 2.7 up to 15 kohm. The devices are managed in couples by guiding a N.C. relais. Each input is enabled by a 4 way dipswitch and by a set of two-coloured LEDs which display the status of the devices.
LINK TO NEW PRODUCT HERE >
Instruction manual for the IRFC4D Resistive Safety Edge Monitor
DFM IRFC4D (8K2) Safety Edge Monitor Manual
  • Electronic control card for closing and opening systems equipped with electromechanical or resistive safety edges. The device is installed between the sensor of the safety edge and the control unit and it keeps on controlling the state of circuitry causing the gate motion to stop in case of anomaly.
  • It detects the short circuit condition, the cut of the electric wires as well as the normal functioning of the electromechanical micro switch or of the resistive safety edge.
  • A maximum 4 devices can be connected with values from 2.7 up to 15 kohm. The devices are managed in couples by guiding a N.C. relais. Each input is enabled by a 4 way dipswitch and by a set of two-coloured LEDs which display the status of the devices.

IRFC4/D Resistive Safety Edge Monitor Cat 3
  • Electronic control card for closing and opening systems equipped with electromechanical or resistive safety edges. The device is installed between the sensor of the safety edge and the control unit and it keeps on controlling the state of circuitry causing the gate motion to stop in case of anomaly.
  • It detects the short circuit condition, the cut of the electric wires as well as the normal functioning of the electromechanical micro switch or of the resistive safety edge.
  • A maximum 4 devices can be connected with values from 2.7 up to 15 kohm. The devices are managed in couples by guiding a N.C. relais. Each input is enabled by a 4 way dipswitch and by a set of two-coloured LEDs which display the status of the devices.
LINK TO NEW PRODUCT HERE >
Instruction manual for the IRFC4D Resistive Safety Edge Monitor
DFM IRFC4D (8K2) Safety Edge Monitor Manual
  • Electronic control card for closing and opening systems equipped with electromechanical or resistive safety edges. The device is installed between the sensor of the safety edge and the control unit and it keeps on controlling the state of circuitry causing the gate motion to stop in case of anomaly.
  • It detects the short circuit condition, the cut of the electric wires as well as the normal functioning of the electromechanical micro switch or of the resistive safety edge.
  • A maximum 4 devices can be connected with values from 2.7 up to 15 kohm. The devices are managed in couples by guiding a N.C. relais. Each input is enabled by a 4 way dipswitch and by a set of two-coloured LEDs which display the status of the devices.
Customer Reviews (0)