The Gatemaster GRS Safety Gate Restrainer is a simple but essential safety device to prevent the gate falling over should the top hinge fail.
This is following the new mandatory rule (British Standard EN 12604:2017) that requires 3 hinges on all new swing gates.
- Tough design, stainless steel wire rope and robust crimped end ferrules
- Easy to fit - simply drill a 13mm hole in the gate and the post
- Tested on gates up to 500kg
Installation:
1. Drill a 13mm hole into the gate and the post, 30-50mm above or below the top hinge.
2. Slot the two end stops into the holes and push on the plastic bushes. These protect the gate from scratches and allow the wire to slide in and out easily.
The Gatemaster GRS Safety Gate Restrainer is a simple but essential safety device to prevent the gate falling over should the top hinge fail.
This is following the new mandatory rule (British Standard EN 12604:2017) that requires 3 hinges on all new swing gates.
- Tough design, stainless steel wire rope and robust crimped end ferrules
- Easy to fit - simply drill a 13mm hole in the gate and the post
- Tested on gates up to 500kg