GiBiDi BA230 / AS05550
BA 230 Gate Control Panel
Fully Programmable via LCD Proffessional Panel with new firmware to suit one or two 230V motors for swinging and sliding gates, overhead doors and barriers.
Technical Specifications
-
Times - Self Learning.
-
Red leds warning of n.c. contacts.
-
Green leds warning of n.o. contacts.
-
Two independent 12Vdc electrical lock outputs.
-
12 Vdc or 230 Vac couurtesy light outputs.
-
Safety test run before the oprning and closing cycles.
-
Photocell test run before the opening and closing cycles.
-
2s motor inversion after tripping of safety edges.
-
Digital programming of all functions.
-
Seperate motor work time adjustment.
-
Independent slowdown adjustment for both motors.
-
Adjustable pedestrian timing function.
-
Force adjustment with three modalities with 10 levels for each motor.
-
Decelerations enabling with single or double limit switch.
-
Safety edge input of 8k2 or n.c.
-
Modes of system configurationfrom swing gate, overhead/barrier, and sliding gate, single or twin.
Among features it provides slow down and if mechanical or 8K2 safety edges are installed, anti crushing can be programmed which then can conform to requirements specified in EN12453.
GiBiDi BA230 / AS05550
BA 230 Gate Control Panel
Fully Programmable via LCD Proffessional Panel with new firmware to suit one or two 230V motors for swinging and sliding gates, overhead doors and barriers.
Technical Specifications
- Times - Self Learning.
- Red leds warning of n.c. contacts.
- Green leds warning of n.o. contacts.
- Two independent 12Vdc electrical lock outputs.
- 12 Vdc or 230 Vac couurtesy light outputs.
- Safety test run before the oprning and closing cycles.
- Photocell test run before the opening and closing cycles.
- 2s motor inversion after tripping of safety edges.
- Digital programming of all functions.
- Seperate motor work time adjustment.
- Independent slowdown adjustment for both motors.
- Adjustable pedestrian timing function.
- Force adjustment with three modalities with 10 levels for each motor.
- Decelerations enabling with single or double limit switch.
- Safety edge input of 8k2 or n.c.
- Modes of system configurationfrom swing gate, overhead/barrier, and sliding gate, single or twin.
Among features it provides slow down and if mechanical or 8K2 safety edges are installed, anti crushing can be programmed which then can conform to requirements specified in EN12453.