This control board has been designed to control both swing-leaf and sliding-leaf gates for vehicle and pedestrian access
control.
• The E145 comes with safezone technology - obstacle detection and reversal on contact. (when the optional encoder is
used).
• Greentech are solutions which save up to 90% of power compared to traditional systems ( thanks to the innovative power
supply switching systems.
• The board is able to automatically adapt to different input voltages (from 90V~ to 260V~), maintaining a constant output
voltage to accessories.
• Added connectivity - the new boards support BUS 2EASY and can be programmed from PC/MAC
• Backward compatible - can be fitted to exisiting installations
• Can automatically find the deceleration and stop points during setup when using the safecoder with physical stops.
• In event of power failure the optional absolute encoder keeps the leaf position memorised
• It has embedded radio decoding in order to support only orginal FAAC transmitters (upto 1600 radio codes can be stored).
It also has a 5 pin connector for plugging existing radio controls.
• Built in timer (programmed via a PC).
• Traditional and Bus photocell inputs.
• Event log (via PC).
2 programming levels are available from the board (BASIC and ADVANCED), using buttons and LCD display, 3rd level from PC.
This board also allows you the option to program using PC or MAC, connected via USB. With the Easyboard programming
software you can choose whether to follow the wizard guided installation or customise your system in all its parts. The board
is prepared ready for future communication modules.
Important
A
mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
This control board has been designed to control both swing-leaf and sliding-leaf gates for vehicle and pedestrian access
control.
• The E145 comes with safezone technology - obstacle detection and reversal on contact. (when the optional encoder is
used).
• Greentech are solutions which save up to 90% of power compared to traditional systems ( thanks to the innovative power
supply switching systems.
• The board is able to automatically adapt to different input voltages (from 90V~ to 260V~), maintaining a constant output
voltage to accessories.
• Added connectivity - the new boards support BUS 2EASY and can be programmed from PC/MAC
• Backward compatible - can be fitted to exisiting installations
• Can automatically find the deceleration and stop points during setup when using the safecoder with physical stops.
• In event of power failure the optional absolute encoder keeps the leaf position memorised
• It has embedded radio decoding in order to support only orginal FAAC transmitters (upto 1600 radio codes can be stored).
It also has a 5 pin connector for plugging existing radio controls.
• Built in timer (programmed via a PC).
• Traditional and Bus photocell inputs.
• Event log (via PC).
2 programming levels are available from the board (BASIC and ADVANCED), using buttons and LCD display, 3rd level from PC.
This board also allows you the option to program using PC or MAC, connected via USB. With the Easyboard programming
software you can choose whether to follow the wizard guided installation or customise your system in all its parts. The board
is prepared ready for future communication modules.
Important
A
mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
