Diablo Magna sensor is designed for easy vehicle entry & exits. Easy fitting allows for quick installations whislt resistive wiring requires very little maintenance.
- Does not require any loops to be cut. Instead the sensor does the job of the loops.
- Saves time, mess and is much more reliable and quicker to install than a conventional loop detector.
- Simpler wiring than a loop detector with just 4 wires and no module to fit.
- Digital technology allows exit sensors to to be over 100m from the control board.
Technical Specifications:
Power: 16-30V ac / 12-30V dc
Dimensions: 16mm x 90mm
Rating: IP 67 Rated
Speed: 0.3 Seconds Response Time
Cable: 5m PUR, 5.6mm
Output: Normally Open Output
Contact: 100mA max @ 30V ac/dc
Dual purpose for exit when mounted inside the property to allow for automated exit, or entry when mounted outside of the property to allow for automted entry.
Magnas recognize vehicles by their ferrous content. All parameters are self setting to suit site conditions. Mounted in the middle of the road below ground level, the direct burial cable, attached to the sensor goes directly to the control panel in a shallow slot. The 4 wire cable is wired in and self-sets.
- Does not require any loops to be cut. Instead the sensor does the job of the loops.
- Saves time, mess and is much more reliable and quicker to install than a conventional loop detector.
- Simpler wiring than a loop detector with just 4 wires and no module to fit.
- Digital technology allows exit sensors to to be over 100m from the control board.
Technical Specifications:
Power: 16-30V ac / 12-30V dc
Dimensions: 16mm x 90mm
Rating: IP 67 Rated
Speed: 0.3 Seconds Response Time
Cable: 5m PUR, 5.6mm
Output: Normally Open Output
Contact: 100mA max @ 30V ac/dc
