BFT RIGEL5, BFT RIGEL 5 Gate Control Panel
- BFT Rigel 5 with incorporated two-channel board
- The RIGEL 5 control panel is designed to control one or more operators up to 600w power.
- The use of this control panel allows you to adjust the braking and torque of the operators.
- Programming can be carried out by means of an integrated display.
RIGEL5 also envisages: slowdown of the approach speed (only for motorisations with limit switches); separate closing and opening limit switch inputs: programmable opening and closing delay; exit for courtesy light and zone light; separate inputs for the safety devices (opening and closing photocells, safety edge,ADMAP) 12 Vdc output for electric bolt or suction cup lock; output for controlling a stair light timer, a clock input usable for complete or pedestrian opening; connector traffic light/preheating card (SSR5) 2, 3 0r 4 step logic unit or with hold-to-run mode: separate opening and closing inputs; output for second radio channel/door LED lock button; jog function when opening and closing locking maintenance; set up for centralized serial control, universal coupling for radio receiver Complies with the EN 12453 and En 12445 standards, Compatible with the EElink protocol.
NO LONGER AVAILABLE - ALTERNATIVES BELOW:
BFT RIGEL 6
ELBE 909/B
Optional Upgrade
909A Rigel 5 replacement - Works with all BFT remote controls ...
Easier to set up than the Rigel 5. Easy set up with auto-programming function. Obstacle detection (To fully closed - using safety proximity switch.), 8k2 Safety edge input, on board radio card. Electric Lock output etc etc....
Developed to comply with the very latest European Norms relating to Electric Gate Safety.
* In most cases it adds new safety features missing from the original control boards*.
Used as standard equipment by professional installers nationwide.
Important
A mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
BFT RIGEL5, BFT RIGEL 5 Gate Control Panel
- BFT Rigel 5 with incorporated two-channel board
- The RIGEL 5 control panel is designed to control one or more operators up to 600w power.
- The use of this control panel allows you to adjust the braking and torque of the operators.
- Programming can be carried out by means of an integrated display.
RIGEL5 also envisages: slowdown of the approach speed (only for motorisations with limit switches); separate closing and opening limit switch inputs: programmable opening and closing delay; exit for courtesy light and zone light; separate inputs for the safety devices (opening and closing photocells, safety edge,ADMAP) 12 Vdc output for electric bolt or suction cup lock; output for controlling a stair light timer, a clock input usable for complete or pedestrian opening; connector traffic light/preheating card (SSR5) 2, 3 0r 4 step logic unit or with hold-to-run mode: separate opening and closing inputs; output for second radio channel/door LED lock button; jog function when opening and closing locking maintenance; set up for centralized serial control, universal coupling for radio receiver Complies with the EN 12453 and En 12445 standards, Compatible with the EElink protocol.
NO LONGER AVAILABLE - ALTERNATIVES BELOW:
BFT RIGEL 6
ELBE 909/B
Optional Upgrade
909A Rigel 5 replacement - Works with all BFT remote controls ...
Easier to set up than the Rigel 5. Easy set up with auto-programming function. Obstacle detection (To fully closed - using safety proximity switch.), 8k2 Safety edge input, on board radio card. Electric Lock output etc etc....
Developed to comply with the very latest European Norms relating to Electric Gate Safety.
* In most cases it adds
new safety features missing from the original control boards*.
Used as standard equipment by professional installers nationwide.
Important
A
mains filter should be fitted on the supply to the control panel.
It reduces mains interference and prolongs the life of the PCB.
