ASO Resistive Gate Safety Edge SKL15-10TT
ASO Resistive Gate Safety Edge SKL15-10
Resistive Gate Safety Edge Explained.
Hinged Protection - Resistive Safety Edge by ASO 8k2 has a switching chamber with a 4mm gap integrated into the rubber profile.
(End) Resistive Safety Edge with 8.2kΩ resistor.
This is used at the end of the line and has an 8.2k
Ω resistor integrated into the plug end. The other end the plug is pre-wired with a 2 core 2.5m rubberised cable. End caps cover the plugs.
Note - Generally if wiring directly into a control board with an 8.2k
Ω input you would use only one of these and the others would be "line or through edges" in series, however you can use multiple End Resistive Edges with 8.2k
Ω resistors when using a safety edge monitor like the IRFC4/D or ASO SK32-24.
(Line) Resistive Gate Safety Edge without 8.2kΩ resistor.
This is used in a line of safety edges that terminates with a end resistive edge that contains an 8.2k
Ω resistor. This type has a pre-wired plug with a 2 core 2.5m rubberised cable on both ends. End caps cover the plugs.
Note - This edge can only be used in a line of edges that terminates in an end type edge.
A resistive safety edge connects to electronics (control board with 8.2k
Ω or safety monitor) that reads the 8.2k
Ω resistance. When the edge is pressed the two conductive edges come together and create a short, this alters the resistance, the electronics can read this and then output a N/C normally closed signal to the gate control board.
Directly wired edges can maintain a Cat 3 rating if used with a compatible 8.2k
Ω control board or safety monitor. On a moving sliding gate Cat 2 is achieved using an easy to fit wireless transmission like the JCM Radio Band with the auto test, or Cat 3 by using the Indus Inductive Transmission System or Pro Glide Transmission System.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions. The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy '
Photocell Beams'.
Please call us with any questions.
All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to
view here.