36v Solar Power Plant

PRICE RANGE: £54.00 - £751.42
The 36v Solar Power Plant is ideal for electric gates with out a mains power source available.
VIEW OPTIONS & Full Description
Order in the next Hours Mins and Seconds,
To get your item delivered on Friday
Enquire about this product
Item Code & Description
price
qty
order
KITSOLAR1003 36v / 24v Solar Power Plant Kit
£751.42 Ex VAT: £626.18
-
+
KITSOLAR1004 36v / 24v High Capacity Solar Power Plant Additional Kit
£526.15 Ex VAT: £438.46
-
+
SOL-P-1850 Solar Panel Mounting Post 1.8m
£120.67 Ex VAT: £100.56
-
+
EGS008 Solar Extension Lead Kit 7m
£54.00 Ex VAT: £45.00
-
+



Our 36v Solar Power Plant provides power to gate automation away from a power source.

36v Solar Kit Contains:
Epever Tracer Solar Charge Controller MPPT
24v to 36v Power Relay
24v to 36v 8A Converter
Leads and Loom Harness
Yuasa Rec 22-12 12v Batteries x2
12v Solar Panel 70w x2
Solar Panel Bracket - Tangential
7m Solar Cable Extension MC4 (Pair)
Misc Nuts & Bolts
Fibox & Back Plate

36v High Capacity 24v Solar Kit Contains:
12v Solar Panel 70w x2
Yuasa Rec 22-12 12v Batteries x2
Solar Panel Bracket - Tangential
Misc Nuts & Bolts
Y Splitter Pack

Features:

    The mono-crystalline solar panel charges the battery and the gate kit is battery powered.  Mono-crystalline panels are nicknamed moonlight panels and will give charge to the battery even when there is full cloud cover.
    A fibreglass box is used as it does not condensate in winter keeping all the electrics in a good safe condition.  A vent must be fitted to avoid the build up of dangerous gases from the battery
    Because we live in the UK, and the sun is unpredictable (even with all these top components) we developed a solar charging relay.  It works by switching off the safety beams and putting the solar board to stand by, or sleep mode when not in use.  Within a second, and with one press of the remote the control board wakes up, the beams come online and the gate will open.  After a predetermined time 3 - 5 minutes the board goes back to sleep.  Thus saving lots of power. (This part is now integral to the automation pack control panel)
    Solar charge controller stops the battery from being overcharged.  We only supply Epever tracer MPPT charge controllers, the  Rolls Royce of charge controllers.
    We use 2 x 22ah Valve regulated lead acid battery that will give a long trouble free service.  The size of battery and Ah have been carefully chosen to give maximum storage capacity paired with optimum charging.
    Our solar control board has been chosen for its low power consumption and reliability.


Our solar customers include the ECO centre cambridge, Schools, Farm Estates including in the North of Scotland, Haulage Yards etc.

All solar panels should be facing due south to track the winter sun with the least amount of shade for optimum performance. No guarantee is made that intervening charging won’t be necessary for any particular purpose when applied.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.

All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to view here.

Our 36v Solar Power Plant provides power to gate automation away from a power source.

36v Solar Kit Contains:
Epever Tracer Solar Charge Controller MPPT
24v to 36v Power Relay
24v to 36v 8A Converter
Leads and Loom Harness
Yuasa Rec 22-12 12v Batteries x2
12v Solar Panel 70w x2
Solar Panel Bracket - Tangential
7m Solar Cable Extension MC4 (Pair)
Misc Nuts & Bolts
Fibox & Back Plate

36v High Capacity 24v Solar Kit Contains:
12v Solar Panel 70w x2
Yuasa Rec 22-12 12v Batteries x2
Solar Panel Bracket - Tangential
Misc Nuts & Bolts
Y Splitter Pack

Features:

    The mono-crystalline solar panel charges the battery and the gate kit is battery powered.  Mono-crystalline panels are nicknamed moonlight panels and will give charge to the battery even when there is full cloud cover.
    A fibreglass box is used as it does not condensate in winter keeping all the electrics in a good safe condition.  A vent must be fitted to avoid the build up of dangerous gases from the battery
    Because we live in the UK, and the sun is unpredictable (even with all these top components) we developed a solar charging relay.  It works by switching off the safety beams and putting the solar board to stand by, or sleep mode when not in use.  Within a second, and with one press of the remote the control board wakes up, the beams come online and the gate will open.  After a predetermined time 3 - 5 minutes the board goes back to sleep.  Thus saving lots of power. (This part is now integral to the automation pack control panel)
    Solar charge controller stops the battery from being overcharged.  We only supply Epever tracer MPPT charge controllers, the  Rolls Royce of charge controllers.
    We use 2 x 22ah Valve regulated lead acid battery that will give a long trouble free service.  The size of battery and Ah have been carefully chosen to give maximum storage capacity paired with optimum charging.
    Our solar control board has been chosen for its low power consumption and reliability.


Our solar customers include the ECO centre cambridge, Schools, Farm Estates including in the North of Scotland, Haulage Yards etc.

All solar panels should be facing due south to track the winter sun with the least amount of shade for optimum performance. No guarantee is made that intervening charging won’t be necessary for any particular purpose when applied.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.



Our 36v Solar Power Plant provides power to gate automation away from a power source.

36v Solar Kit Contains:
Epever Tracer Solar Charge Controller MPPT
24v to 36v Power Relay
24v to 36v 8A Converter
Leads and Loom Harness
Yuasa Rec 22-12 12v Batteries x2
12v Solar Panel 70w x2
Solar Panel Bracket - Tangential
7m Solar Cable Extension MC4 (Pair)
Misc Nuts & Bolts
Fibox & Back Plate

36v High Capacity 24v Solar Kit Contains:
12v Solar Panel 70w x2
Yuasa Rec 22-12 12v Batteries x2
Solar Panel Bracket - Tangential
Misc Nuts & Bolts
Y Splitter Pack

Features:

    The mono-crystalline solar panel charges the battery and the gate kit is battery powered.  Mono-crystalline panels are nicknamed moonlight panels and will give charge to the battery even when there is full cloud cover.
    A fibreglass box is used as it does not condensate in winter keeping all the electrics in a good safe condition.  A vent must be fitted to avoid the build up of dangerous gases from the battery
    Because we live in the UK, and the sun is unpredictable (even with all these top components) we developed a solar charging relay.  It works by switching off the safety beams and putting the solar board to stand by, or sleep mode when not in use.  Within a second, and with one press of the remote the control board wakes up, the beams come online and the gate will open.  After a predetermined time 3 - 5 minutes the board goes back to sleep.  Thus saving lots of power. (This part is now integral to the automation pack control panel)
    Solar charge controller stops the battery from being overcharged.  We only supply Epever tracer MPPT charge controllers, the  Rolls Royce of charge controllers.
    We use 2 x 22ah Valve regulated lead acid battery that will give a long trouble free service.  The size of battery and Ah have been carefully chosen to give maximum storage capacity paired with optimum charging.
    Our solar control board has been chosen for its low power consumption and reliability.


Our solar customers include the ECO centre cambridge, Schools, Farm Estates including in the North of Scotland, Haulage Yards etc.

All solar panels should be facing due south to track the winter sun with the least amount of shade for optimum performance. No guarantee is made that intervening charging won’t be necessary for any particular purpose when applied.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.

All automated / electric gate installations need to comply with the European Machinery Directive. A comprehensive guide for this is included with all our kits, and is available to view here.

Our 36v Solar Power Plant provides power to gate automation away from a power source.

36v Solar Kit Contains:
Epever Tracer Solar Charge Controller MPPT
24v to 36v Power Relay
24v to 36v 8A Converter
Leads and Loom Harness
Yuasa Rec 22-12 12v Batteries x2
12v Solar Panel 70w x2
Solar Panel Bracket - Tangential
7m Solar Cable Extension MC4 (Pair)
Misc Nuts & Bolts
Fibox & Back Plate

36v High Capacity 24v Solar Kit Contains:
12v Solar Panel 70w x2
Yuasa Rec 22-12 12v Batteries x2
Solar Panel Bracket - Tangential
Misc Nuts & Bolts
Y Splitter Pack

Features:

    The mono-crystalline solar panel charges the battery and the gate kit is battery powered.  Mono-crystalline panels are nicknamed moonlight panels and will give charge to the battery even when there is full cloud cover.
    A fibreglass box is used as it does not condensate in winter keeping all the electrics in a good safe condition.  A vent must be fitted to avoid the build up of dangerous gases from the battery
    Because we live in the UK, and the sun is unpredictable (even with all these top components) we developed a solar charging relay.  It works by switching off the safety beams and putting the solar board to stand by, or sleep mode when not in use.  Within a second, and with one press of the remote the control board wakes up, the beams come online and the gate will open.  After a predetermined time 3 - 5 minutes the board goes back to sleep.  Thus saving lots of power. (This part is now integral to the automation pack control panel)
    Solar charge controller stops the battery from being overcharged.  We only supply Epever tracer MPPT charge controllers, the  Rolls Royce of charge controllers.
    We use 2 x 22ah Valve regulated lead acid battery that will give a long trouble free service.  The size of battery and Ah have been carefully chosen to give maximum storage capacity paired with optimum charging.
    Our solar control board has been chosen for its low power consumption and reliability.


Our solar customers include the ECO centre cambridge, Schools, Farm Estates including in the North of Scotland, Haulage Yards etc.

All solar panels should be facing due south to track the winter sun with the least amount of shade for optimum performance. No guarantee is made that intervening charging won’t be necessary for any particular purpose when applied.
Safety
The Electric Gate Shop are committed to providing safe electric gate solutions.  The Gate Safety Guide runs through the hazards, and outlines a code of practice.
Click the button for the free GUIDE TO GATE SAFETY.
Click to buy 'Certified Gate Safety Edges' and 'Photocell Beams'.
Please call us with any questions.
Customer Reviews (0)